Process Questionaire Thank you for considering CresTechnologies

Company Name: *		Company Address : *
Plant Name: *		Plant Address : *
Address: *		Location: *

Your Name: *

Phone:

Fax:

Email:

1. Do you have an initial desired process?
Calcining Cooling Drying Granulation/Agglomeration Incineration
Mixing Other (additional details)

2. Do you have an initial desired equipment?
High Temperature Indirect Calcining High Temperature Rotary Kiln Rotary Granulators/Agglomerators Rotary Dryer Indirect Dryer Flash Dryer Spray Dryer Fluid Bed Processor Rotary Cooler No, let CresTechnologies investigate Other (additional details)

3. Is process based upon

8 hours per day	5 days per week	Est. days per year
12 hours	7 days
24 hours

4. Will processing be Continuous Batch

5. Can product material be brought into contact with products of combustion? Yes No
Additional details:

6. Does the product material need to be processed under any special atmosphere or gas? Yes No Additional details (ie. special gas composition, oxidizing/reducing/inert gas requirements, etc.)

7. Is the process Endothermic Exothermic Other
(Additional details)

Material Description
8. Name of material 9. Chemical composition (formula)
10. Detail any Chemical Reactions
11. Material Characteristics:	Feed	Discharge	12. Screen Analysis:	Feed	Discharge
Feed Rate (total)			100% plus
Product Rate (total)			5% minus
Moisture Content (free)			10% minus
Moisture Content (bound)			20% minus
Volatile Content			30% minus
Bulk Density			40% minus
Specific Gravity			50% minus
Specific Heat			60% minus
Angle of Repose			70% minus
Temperature			80% minus
Maximum Permissible Temperature			90% minus
Maximum Exposed Temperature			95% minus
			100% minus
13. Particle size, or amount allowed to be lost as carryover from dusting? % minus
14. What is the general nature of the feed material's handling capability? (check all that apply) Sticky Cohesive Plastic Abrasive Free Flowing Corrosive Viscous Other
15. What is the general nature of the product material's handling capability? (check all that apply) Sticky Cohesive Plastic Abrasive Free Flowing Corrosive Viscous Other
16. Does the material go through a sticky phase, or any other phase change, as it heats up? Yes No Additional details
17. General remarks:

Locale Information

18. Plant Elevation	19. Avg. Summer Temperature	20. Avg. Winter Temperature
	21. Avg. Summer Humidity	22. Avg. Winter Humidity
23. Does locale abrasive or corrosive conditions exists? (ex. airborne sand, marine conditions, etc.) Yes No Additional details
24. Local air quality or emission standards? Governing Agency Governing Office Additional details
25. Local liquid or effluent standards? Governing Agency Governing Office Additional details
26. Will equipment be located indoors or outdoors? Indoors Outdoors Outdoors and Protected
27. Area Rating: Non-Hazardous Hazardous Classification

Utilites
28. Fuel:	Gas, type	Oil, type	Saturated Steam	Superheated Steam	Other
Pressure
Heating Value

29. Electricity Available	30. Water Available		31. Compressed Air
	Process	Potable	Plant	Signal
volts	psi	psi	psi	psi
phase	GPM	GPM	CFM	CFM
hertz	°F	°F

Additional Information:

(Please feel free to provide any additional information, sketches, flow diagrams, specification and details that may aid us in helping you better.)

Project Information

Scope of Supply (CresTechnologies can provide an all inclusive supply, from engineering and equipment supply; to installation. Below is an initial survey of the scope that you may prefer CresTechnologies to provide.)

32. Do you possibly want CresTechnologies to supply the feed system to the equipment? Yes No
Additional details

33. Do you possibly want CresTechnologies to supply the receiving system from the equipment? Yes No
Additional details

34. Do you possibly want CresTechnologies to supply the pollution abatement equipment for the equipment? Yes No Additional details

35. Do you possibly want CresTechnologies to supply the installation of the equipment? Yes No
Additional details

Scheduling (The below data may better provide an accuracy to any pricing, availability of purchase data, or allocation of labor resources. This data is understood to be initial and does not constitute a commitment by you.)

36. What phase is this project currently in? Feasibility Study For Appropriation For Approval For Construction Other Additional details:

37. When will engineering be released? (quarter) of (year)

38. When will equipment specifications be released? (quarter) of (year)

39. When is equipment purchases expected? (quarter) of (year)

40. When is project completion expected? (quarter) of (year)